Cigar Asylum Cigar Forum Mobile
Page 1 of 2
1 2 >
All Cigar Discussion>Converting a wine-cooler into a humidor...
Robulous78 05:02 PM 08-27-2012
I have heard that you can buy a themo-electric wine cooler and with the addition of some cedar paneling and some humification equipment or the "bean bags" you can convert it into a large humidor...

Anyone ever do this? Success? Failure? Helpful Hints?

Anyone know where you can get cedar paneling or cedar board?

As always thanks everyone & Pleasant Smoke,

Rob
[Reply]
AlohaStyle 05:06 PM 08-27-2012
Do a search and/or look through the Accessory Forum... there are many threads telling you how to do this. Yes, many success stories including me. You don't need cedar, just put some cedar cigar boxes in, or use empties to put in loose singles. You can also buy cedar trays for $10 each for singles.
[Reply]
Robulous78 05:10 PM 08-27-2012
Originally Posted by AlohaStyle:
Do a search and/or look through the Accessory Forum... there are many threads telling you how to do this. Yes, many success stories including me. You don't need cedar, just put some cedar cigar boxes in, or use empties to put in loose singles. You can also buy cedar trays for $10 each for singles.
Thanks Aloha,
If you had to estimate what it cost you to make it what would you say?
[Reply]
363 05:13 PM 08-27-2012
Originally Posted by Robulous78:
Thanks Aloha,
If you had to estimate what it cost you to make it what would you say?
If your doing a 28 btl wine cooler with trays from forrest maybe like 400+-
With 10$ trays maybe 300+-
I have an 18btl with open boxes and beads and that ran me 220ish. I plan on getting trays from Forrest at some point thou
[Reply]
Robulous78 05:17 PM 08-27-2012
Originally Posted by 363:
If your doing a 28 btl wine cooler with trays from forrest maybe like 400+-
With 10$ trays maybe 300+-
I have an 18btl with open boxes and beads and that ran me 220ish. I plan on getting trays from Forrest at some point thou
Thanks for the info 363... Very Helpful...
[Reply]
md4958 05:20 PM 08-27-2012
There really isnt much to convert. You can order some cedar shelving from some of the members here, or a drawer for your singles (they are made to fit Vinotemps)

Other than that just stick your boxes in, grab some beads (I always recommend Shilala- see CigarNut for those) and youre good to go.
[Reply]
Robulous78 05:47 PM 08-27-2012
Originally Posted by md4958:
There really isnt much to convert. You can order some cedar shelving from some of the members here, or a drawer for your singles (they are made to fit Vinotemps)

Other than that just stick your boxes in, grab some beads (I always recommend Shilala- see CigarNut for those) and youre good to go.
thanks Md4958,

I'm new here and haven't made it through many of these pages... And, admittedly am full of questions...

what members sell shelving?

vinotemps? is this a brand of winecooler?

How much do the beads run?

and this may be really dumb, but when you use/convert one... do you run the cooler to keep the cigars humidified or at the right temp? or do you just want the wine cooler for its construction and seal?

the reason I ask is I already have a mini fridge of standard construction with a condenser... Do you know of anything I could do to modify this?

Thanks for your help everyone / Md4958,

Rob
[Reply]
bobarian 05:48 PM 08-27-2012
You can spend as much or as little as you feel is necessary. Cedar shelves or trays are not at all necessary but many like the look. With my second Vinotemp I chose to use the wire shelves as it is mainly for box storage, I use empty boxes to hold singles. In my first, I added cedar shelves by cutting 4"x1/4" cedar planks(Woodcraft). I used two pieces per shelf and left about 1-2" in between for air flow.

I also use 1lb of Heartfelt 65% beads in two bags, one on the top shelf and one on the bottom. :-)

The biggest problem with a condenser fridge is raising the temp to an acceptable range for cigars(60-70degrees) for this you will need to connect an external controller such as those made by Johnson Controllers.
[Reply]
TJarv 05:53 PM 08-27-2012
I'm in the process of converting one now

Cooler-$200
Drawers-$200
2 lbs of beads-$100
[Reply]
Robulous78 06:05 PM 08-27-2012
Originally Posted by bobarian:
You can spend as much or as little as you feel is necessary. Cedar shelves or trays are not at all necessary but many like the look. With my second Vinotemp I chose to use the wire shelves as it is mainly for box storage, I use empty boxes to hold singles. In my first, I added cedar shelves by cutting 4"x1/4" cedar planks(Woodcraft). I used two pieces per shelf and left about 1-2" in between for air flow.

I also use 1lb of Heartfelt 65% beads in two bags, one on the top shelf and one on the bottom. :-)

The biggest problem with a condenser fridge is raising the temp to an acceptable range for cigars(60-70degrees) for this you will need to connect an external controller such as those made by Johnson Controllers.
Wow... Alot of information, Thanks Bobarian, a few more questions from a newb if you don't mind...

these controllers? are they cheaper then just buying a new or used cooler? can you ball-park there price?

to be completely honest I am just now starting out on my exploration of cigarland... I am doing fine with what I have currently but I have high hopes for the future... :-)

most of my moo-lah goes to my sticks... :-) So I am trying to accomplish adequate storage for my future expansions on the cheap...

Any bargain or at the least cost effect storage hints anyone can offer? I also hear of bagging sticks and placing them into unused regular beer coolers with beads... thoughts?

My over all question is where does adequate protection meet cost effectiveness?

Thanks BOTL / Bobarian for all the interest and help,

Rob
[Reply]
TJarv 06:06 PM 08-27-2012
Cooler will be wayyyyyyyy cheaper
[Reply]
bobarian 06:07 PM 08-27-2012
A Google search can help you find the cost on an external controller.

Also a search of the accessories forum here will give you many threads on setting up a cooler and a wine fridge. :-)
[Reply]
TJarv 06:07 PM 08-27-2012
http://www.amazon.com/Coleman-100-Qu...coleman+cooler
[Reply]
Robulous78 06:10 PM 08-27-2012
Originally Posted by TJarv:
I'm in the process of converting one now

Cooler-$200
Drawers-$200
2 lbs of beads-$100
Thanks TJarv...
[Reply]
TJarv 06:12 PM 08-27-2012
The wine cooler price will vary depending on model

The price of drawers will vary depending on who you buy from
[Reply]
Robulous78 06:13 PM 08-27-2012
Originally Posted by TJarv:
Cooler will be wayyyyyyyy cheaper
So guessing from your amazon link your saying a beer type cooler with beads is the way to go.... how do you maintain temperature as Bobarian said arould 65/ 70 degrees? do you have to by that controller? or is that not so much an important issue as it is to have the proper amount of beads and a good seal?
[Reply]
TJarv 06:17 PM 08-27-2012
Most on here will tell you that your cigars should be kept in a temp around 70*

If you have a basement, or a room in the house that stays pretty cool it will be fine
[Reply]
Robulous78 06:21 PM 08-27-2012
Thanks TJarv... you get into those Padilla's bighairlogo sent you? I bought the same sampler and thought they were pretty tasty... :-)
[Reply]
TJarv 06:22 PM 08-27-2012
They are still resting, but I am interested in trying them out
[Reply]
Robulous78 06:33 PM 08-27-2012
I'm sure you'll enjoy them... So onto these beads... everyone seems loyal to there bead brand... anyone care to expand on that?

more importantly... any brands to stay away from?

Thanks everyone,

Rob
[Reply]
Page 1 of 2
1 2 >
Up