Cigar Asylum Cigar Forum Mobile
Page 3 of 6
< 123 45 > Last »
Good Eats>Brick Oven Build (Pic heavy)
heyferg 05:15 PM 08-18-2020
Outstanding, Dom. Well done!!

:-)
[Reply]
RevSmoke 07:01 PM 08-18-2020
Wow! You said you are not a mason?
That is incredible!

God's blessings on the project!
[Reply]
CigarNut 09:32 AM 08-19-2020
Awesome, Dom!
[Reply]
Havanaaddict 06:12 PM 08-19-2020
This is all Greek to me, very interesting! I have some questions!
Why on the bottom structure are there 2 sides?
Is it for storing wood?
Is there going to be a chimney or vent?
[Reply]
The Poet 06:49 PM 08-19-2020
Originally Posted by jonumberone:
Got some work in on Saturday, but Sunday was a washout with rain, so I haven't finished the dome yet.
It was a little slow going as the walls got steeper because the bricks want to fall in.
I had to wait a few minuets for each brick to set, and use some wood to prop them up and hold them in place.
I'll be using a domed fiberglass form for the next few rows to prevent this.
I also botched the section where the ring crosses over the entry arch for the first time.
I didn't build it up enough, and turned my ring into a teardrop.
Of course I didn't notice until after the bricks had set up so it took some time to fix.
I had to build up and shape up the mortar in that spot to get the next row back in a ring.

You can see the dip here. The brick that is in the tool, and the one to the right of it

Image

Back to a ring

Image

You can see here how steep the sides are getting.

Image

Image

Where I'm at currently

Image

Image
Nice, Dom. As for your issues with the dome, Filippo Brunelleschi had the same one when he built the dome for the Florence Cathedral. But he solved that in the mid-15th Century, so you have no excuse. :-)
[Reply]
jonumberone 05:44 AM 08-20-2020
Originally Posted by Havanaaddict:
This is all Greek to me, very interesting! I have some questions!
Why on the bottom structure are there 2 sides?
Is it for storing wood?
Yes, it's for wood storage.
The bottom is 7 feet long. I segmented it and left it open on both ends so I wouldn't have to crawl in to get at the wood stored in the back.

Originally Posted by Havanaaddict:
Is there going to be a chimney or vent?

I have to lay another arch at the front, and install the chimney.
That's the plan for today.
[Reply]
CigarNut 07:43 AM 08-20-2020
Forgive a stupid question (or four):

So the wood fire and the cooking food both go in the dome?

If so, I assume that it takes a bit for the oven floor to get hot?

How much wood will it take to get the oven hot?

How long do you think it will take to get it hot?
[Reply]
jonumberone 08:10 AM 08-20-2020
Originally Posted by CigarNut:
Forgive a stupid question (or four):

Ask away :-)

So the wood fire and the cooking food both go in the dome?

Yes. After the oven comes to temp, I'll move the fire to the back of the oven for cooking, and over to the side when doing pizza.

If so, I assume that it takes a bit for the oven floor to get hot?

Yes

How much wood will it take to get the oven hot?

Roughly 90 pounds

How long do you think it will take to get it hot?

3+ hours. It should take over 3 days for the oven to cool down
Obviously this is all based on what I've read. No real world experience..... Yet :-)
[Reply]
BigAsh 08:53 AM 08-20-2020
Originally Posted by jonumberone:
Obviously this is all based on what I've read. No real world experience..... Yet :-)
Tic tock... tic tock....Looking forward to seeing it in action!!....Morning gents!
[Reply]
Havanaaddict 11:51 AM 08-20-2020
Originally Posted by jonumberone:
Yes, it's for wood storage.
The bottom is 7 feet long. I segmented it and left it open on both ends so I wouldn't have to crawl in to get at the wood stored in the back.
I thought that would have been the trick to get Adam to crawl in:-)
[Reply]
yourchoice 12:23 PM 08-21-2020
This is a great thread, Dom. That's all, carry on! :-)
[Reply]
jonumberone 05:23 AM 08-24-2020
Busy weekend here.
I got a lot of work done.
Crawling into the oven to clean and point the joints took way longer than I expected Thursday, so I wasn't able to actually build until Friday evening after work.

Friday night I put up the vent arch

Image

Saturday I put up the flue gallery and covered the dome with the remaining mortar mix.

Image

And made sure the door fit

Image

Sunday I added two inches of ceramic fiber blanket for insulation, lashed it all down with chicken wire, and put on a waterproofing flashing
I also installed a thermowell through the brickwork so I can monitor oven temps when the door isn't in.

Image

Thermowell is more visible here

Image

All that's left to finish the oven is to put on a perlite shell over the blanket.
However, I need to get the granite for the stand cut before I can do this, so I can bring the shell over the granite and eliminate the seam.
Hopefully he doesn't take too long.
[Reply]
8lug 07:02 AM 08-24-2020
Coming along nicely.
[Reply]
CigarNut 09:13 AM 08-24-2020
Truly amazing, Dom!
[Reply]
icehog3 09:45 AM 08-24-2020
Wow! Just wow!
[Reply]
Black Coral 10:34 AM 08-24-2020
Amazing
[Reply]
longknocker 12:23 PM 08-24-2020
Excellent Work, Dom!:-):-)
[Reply]
markem 12:46 PM 08-24-2020
Wow, that is turning out amazing, Dom. You should be quite proud of the result.
[Reply]
DBall 07:32 AM 08-25-2020
This is seriously an incredible build!
[Reply]
Dave128 05:35 PM 08-25-2020
Looking good!
[Reply]
Page 3 of 6
< 123 45 > Last »
Up